 |
|
|
Manufacturers and Technical Consultants:
VARNI-LITE COATINGS, 21595 CURTIS STREET, HAYWARD, CA 94545 |
|
|
|
| The information in this data sheet is to the best of our knowledge correct at the date of printing. The company reserves the right to modify data without notice. Any change in data will normally be followed by issue of a new data sheet. The user should check the date of printing and if more than 12 months have elapsed, then the data should only be used after checking with our nearest sales office to establish that they are still valid. Since condition of application and service may be beyond our control, no liability can be accepted on the basis of these data. Dated 8/31/02 |
|
|
|
| USES: | | For any interior or exterior winery walls where mildew resistance is needed. Can be applied to wood, masonry, concrete and metal. Metal surfaces should be primed prior to application. |
|
|
|
| PRODUCT DESCRIPTION: | A premium quality 100% Acrylic paint that is tough, flexible and durable. Contains only USDA-approved fungicides. |
|
|
|
| COLOR: | White and light colors upon request. |
|
|
|
| COVERAGE: | 300-400 square feet per gallon. |
|
|
|
| FINISH: | Soft sheen. |
|
|
|
| VISCOSITY: | 84-86 KU |
|
|
|
| DRYING TIME: | 30 minutes at 77° F, 50% relative humidity. |
|
|
|
| THINNER: | Water for thinning and clean-up. |
|
|
|
| SURFACE PREPARATION: | All surfaces should be cleaned thoroughly and should be free of mildew, dust, dirt, oil or grease. Surfaces to be painted should be cured, firm and dry. Etch glossy, glazed or dense surfaces. Metal surfaces should be primed prior to application. |
|
|
|
| METHOD OF APPLICATION: | Apply by means of brush, roller or spray. Do not apply if air or surface temperature is below 50° F or is likely to fall below 50°F within 2 hours of application. |
|
|
|
